Owners Manual
Table Of Contents
- Precision 3640 Tower Service Manual
- Working on your computer
- Technology and components
- Major components of your system
- Disassembly and reassembly
- Recommended tools
- Screw list
- Chassis rubber feet
- Cover
- SD card—optional
- Bezel
- Hard drive
- PSU hinge
- Graphics card
- Memory module
- Speaker
- Coin cell battery
- Power supply unit
- Optical drive
- WLAN module and SMA antenna
- IO panel
- Solid state drive
- Power button module
- Heatsink assembly
- Voltage regulator heat sink
- Front fan
- System fan
- Optional IO card
- Processor
- Intrusion switch
- System board
- Troubleshooting
- Getting help and contacting Dell
- Cable cover
- Dust filter
Steps
1. Place the SSD thermal pad into the slot on the system board [1] .
2. Slide the PCIe SSD card into the slot and tighten the M2x2.5 screw to secure the SSD card to the system board [2,3].
Figure 11. 2242 SSD
3. Install the:
a. Cover.
b. Graphics card.
4. Close the PSU hinge.
5. Follow the procedure in After Working Inside Your Computer.
64
Disassembly and reassembly