Service Manual

2. Remove the:
a) base cover
b) battery
c) keyboard
d) WLAN card
e) WWAN card
f) SSD card
g) memory module
h) Touchpad
i) heat sink
j) coin cell battery
k) chassis frame
l) system board
m) hinge cap
n) display assembly
NOTE:
The component you are left with is the palm rest.
3. Install the following components on the new palm rest.
a) display assembly
b) hinge cap
c) system board
d) chassis frame
e) coin cell battery
f) heat sink
g) Touchpad
h) memory module
i) SSD card
j) WWAN card
k) WLAN card
l) keyboard
m) battery
n) base cover
52
 

