Service Manual

c) WLAN

d) WWAN card

e) display assembly

f) display bezel

g) display panel

3. To remove the camera:

a) Disconnect the camera cable from the connector on the display panel[1].

b) Carefully pry and lift the camera module from the display back cover [2].

Installing camera

1. Insert the camera into the slot on the display back cover.

2. Connect the display cable to the connector.

3. Connect the camera cable to the connector on the camera module.

4. Install the :

a) display panel

b) display bezel

c) display assembly

d) WLAN

e) WWAN card

f) memory module

g) battery

h) base cover

5. Follow the procedure in After working inside your computer.

Disassembly and reassembly