Service Manual

Installing the display panel

1. Connect the eDP cable to the connector and affix the blue tape.

2. Affix the adhesive tape to secure the eDP cable.

3. Replace the display panel to align with the screw holders on the display assembly.

4. Tighten the M2x3 screws to secure the display panel to the display assembly.

5. Install the:

a) display bezel

b) display assembly

c) hinge cap

d) WWAN card

e) WLAN card

f) battery

g) base cover

6. Follow the procedure in After working inside your computer.

Display (eDP) cable

Removing the eDP cable

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

Disassembly and reassembly