Service Manual

Display panel

Removing the display panel

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

c) WWAN card

d) WLAN card

e) hinge cap

f) display assembly

g) display bezel

3. Remove the M2x3 screws (4) that secure the display panel to the display assembly [1] and lift to turn over the display panel to access

the eDP cable [2].

4. To remove the display panel:

a) Peel off the adhesive tape [1].

b) Lift the blue tape that secures the display cable [2].

c) Lift the latch to disconnect the display cable from the connector on the display panel [3, 4].

Disassembly and reassembly