Service Manual

Installing the hinge cap

1. Place the hinge bracket to align with the screw holders on the laptop.

2. Tighten the M2x3 screws to secure the display assembly to the laptop.

3. Install the:

a) battery

b) base cover

4. Follow the procedure in After working inside your computer.

Display assembly

Removing the display assembly

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

c) WWAN card

d) WLAN card

e) hinge cap

3. To disconnect the display cable:

a) Release the WLAN cable from the routing channels [1].

b) Remove the M2x3 screws (2) and lift the metal bracket that secure the display cable on the computer [2,3].

c) Disconnect the display cable [4].

Disassembly and reassembly