Service Manual

Installing the speaker

1. Place the speakers into the slots on the laptop.

2. Route the speaker cable through the retention clips through the routing channel.

3. Connect the speaker and LED board cable to the laptop.

4. Install the:

a) chassis frame

b) SSD card

c) WLAN card

d) battery

e) base cover

5. Follow the procedure in After working inside your computer.

Hinge cap

Removing the hinge cap

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

3. To remove the hinge cap:

a) Remove the M2x3 screws that secure the hinge cap to the laptop [1].

b) Remove the hinge cap from the laptop [2].

Disassembly and reassembly