Service Manual

Installing the SmartCard reader

1. Place the SmartCard reader on the laptop.

2. Tighten the M2x3 screws to secure the SmartCard reader to the laptop.

3. Affix the SmartCard reader cable and connect the cable to the connector on the system board.

4. Install the:

a) chassis frame

b) SSD card

c) WWAN card

d) WLAN card

e) battery

f) base cover

5. Follow the procedure in After working inside your computer.

LED board

Removing the LED board

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) base cover

b) battery

c) WLAN card

Disassembly and reassembly