Service Manual

2. Place the metal bracket on the power connector port.

3. Tighten the M2x3 screw to secure the metal bracket to the power connector port on the laptop.

4. Connect the power connector port cable to the connector on the system board.

5. Install the:

a) battery

b) base cover

6. Follow the procedure in After working inside your computer.

Chassis frame

Removing the chassis frame

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) SIM card module

b) base cover

c) battery

d) WLAN card

e) WWAN card

f) SSD card

3. To release the chassis frame:

a) Release the WLAN and WWAN cables from the routing channels [1].

b) Disconnect the speaker cable from the connector on the system board [2].

c) Lift the latch to disconnect the backlight cable (optional) [3], touchpad cable [4], pointstick cable [5], and keyboard cable [6] from

the connector on the system board.

4. To remove the chassis frame:

Disassembly and reassembly