Service Manual

c) Lift the latch and disconnect the cable from the connector on the system board [3].
d) Lift the latch and disconnect the cable from the connector on the system board [4].
e) Turn over the system and open the laptop in front view mode.
f) Remove the M2 x 2.5 (6) screws that secure the keyboard to the system [1].
g) Flip the keyboard from the bottom and lift it from the system along with the keyboard cable and the keyboard back light cable [2].
WARNING:
Gently pull the keyboard cable and the keyboard back light cable routed beneath the chassis frame to
avoid damaging the cables.
24 Disassembly and reassembly