Service Manual

Memory modules
Removing the memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) base cover
b) battery
3. To remove the memory module:
a) Press the clips securing the memory module until the memory pops-up [1].
b) Pull the memory module from the connector on the system board [2].
Installing the memory module
1. Insert the memory module into the memory module socket then press downward until the clips secure the memory module.
NOTE:
Ensure to insert the memory module at an angle NOT more than 30°. Press the memory module down to
engage the retaining clips.
2. Install the:
a) battery
b) base cover
3. Follow the procedures in After working inside your computer.
22
Disassembly and reassembly