Precision 3240 Compact Accessories Installation Guide Regulatory Model: D16S Regulatory Type: D16S001 November 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Before you begin ......................................................................................................... 4 Chapter 2: Precision Compact VESA sleeve mount........................................................................ 5 Chapter 3: Precision Compact Dual VESA sleeve mount.................................................................7 Chapter 4: Dell monitor stand VESA mount..................................................................................
1 Before you begin 1. Save and close all open files and exit all open applications. 2. Shut down your system: Click Start > Power > Shut down . NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down instructions. 3. Disconnect your system and all attached devices from their electrical outlets. 4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your system.
2 Precision Compact VESA sleeve mount To avoid clutter on your desk, you can use the Precision Compact VESA sleeve mount to secure the Precision 3240 compact system under the desk. 1. Follow the instructions in Before you begin. 2. NOTE: Precision Compact VESA sleeve mount has holes for the screw mounts 100 mmx100 mm apart. Install the VESA sleeve mount under the desk with the captive thumbscrew facing inside the desk. 3.
. Follow the instructions in After installing the accessory.
3 Precision Compact Dual VESA sleeve mount For flexible installation, you can use the Precision Compact Dual VESA sleeve mount to secure the Precision 3240 Compact system on a VESA compatible single or dual monitor arms. Precision compact dual VESA Sleeve mount supports the following monitor arms: ● Dell Dual Monitor Arm - MDA20 ● Dell Single Monitor Arm - MSA20 NOTE: The Precision Compact dual VESA sleeve mount supports up to 68.58 cm (27 in.) monitor.
5. Slide the system into the VESA sleeve mount aligning the screw holes on the VESA sleeve mount with the screw holes on the system. NOTE: Ensure that the Dell logo on the system faces the same direction as the ∆ (triangle icon) on the VESA sleeve mount. 6. Tighten the thumbscrew to secure the system to the VESA sleeve mount.
7. Align the screw holes on the VESA adapter plate with the screw holes on the VESA sleeve mount. 8. Use the four M4x10 screws to secure the VESA adapter plate to the VESA sleeve mount. NOTE: Ensure the ∆ (triangle icon) the VESA adapter plate and the ∆ (triangle icon) on the VESA sleeve mount are aligned.
9. Lift the monitor and insert the slots on the VESA bracket into the hooks on the monitor arm until you hear a click. 10. Tighten the single M4x10 screw on the monitor arm to secure the dual VESA sleeve mount to the monitor arm.
. Follow the instructions in After installing the accessory.
4 Dell monitor stand VESA mount For flexible installation, you can use the Dell monitor stand VESA mount to secure the Precision 3240 Compact system on the Dell VESA monitor stand. 1. Follow the instructions in Before you begin. 2. Place the monitor stand base extender on the base of the monitor stand. 3. Use the four M4x6 screws to secure the monitor stand base extender under the monitor stand. 4. Place the Dell monitor stand VESA mount on the system.
6. Align the slot on the Dell monitor stand VESA mount with the cable management slot on the Dell monitor stand.
7. Install the socket [1] from the monitor side into the cable management slot. 8. Use the plug [2] from the system side and turn the plug knob to secure the Dell monitor stand VESA mount to the monitor stand.
9. Lift the stand and attach the monitor to the stand. 10. Follow the instructions in After installing the accessory.
5 Dell A/C adapter sleeve mount To avoid clutter on your desk and for flexible installation, you can use the Dell A/C adapter sleeve mount to secure the A/C adapter behind the monitor (on Dell monitor stand base extender) or under the desk. Under the desk 1. Follow the instructions in Before you begin. 2. Place the A/C adapter on the A/C adapter sleeve mount. 3. Wrap the sleeve around the A/C adapter and insert the retaining tabs into the holes at an appropriate level.
4. NOTE: The screw holes on the A/C adapter sleeve mount are 70 mm (2.756 in.) apart. Use the two M3x6 screws to secure the A/C adapter sleeve mount under the desk.
5. Follow the instructions in After installing the accessory. Related-links: ● ● ● ● ● Precision Compact VESA sleeve mount on page 5 Precision Compact Dual VESA sleeve mount on page 7 Precision Compact Dust Filter on page 22 Precision Compact Cable Cover on page 24 Dell monitor stand VESA mount on page 12 On the monitor stand 1. Follow the instructions in Before you begin. 2. Turn over the monitor stand and place the A/C adapter sleeve mount on the Dell monitor stand base extender. 3.
4. Place the A/C adapter in the A/C adapter sleeve mount.
5. Wrap the sleeve around the A/C adapter and insert the retaining tabs into the holes at an appropriate level.
6. Follow the instructions in After installing the accessory.
6 Precision Compact Dust Filter The dust filter for the Dell Precision 3240 Compact helps protect the system from fine dust particles. After installation, you can set a pre-boot reminder in the BIOS to clean or replace the dust filter at customized time interval using the interval setting in the BIOS. 1. Follow the instructions in Before you begin. 2. Align the top edge of the dust filter with the top edge of the system. 3. Press the lower edge of the dust filter to close over the system. 4.
NOTE: To clean the dust filter, brush or gently vacuum and then wipe down the external surfaces with a moist cloth.
7 Precision Compact Cable Cover The cable cover for the Dell Precision 3240 Compact system protects the ports and organize cables that are connected to the system unit. 1. Follow the instructions in Before you begin. 2. NOTE: Images that are shown below may vary depending on your system configuration. Remove the thumbscrew and the cable clip from the rear of the system unit. 3. Align the rear bracket along with the cable clip to the back of the system. 4.
5. Route the cables through the slot on the cable cover and connect the cables to their respective ports. 6. Turn the antenna outwards to pass through the antenna slot at the top of the cable cover. 7. Align the cable cover retaining hooks into the slots on the Dell Precision 3240 Compact chassis. CAUTION: Take care not to bend or break the delicate plastic hooks. 8. Gently press down on the cable cover until it clicks into place. 9. Slide the latch to lock the cable cover in place.
NOTE: For added security, use the Kensington cable lock to secure the system unit.
8 After installing the accessory 1. Replace all screws and ensure that no stray screws remain. 2. Connect any external devices, peripherals, or cables you removed before working on your system. 3. Connect your system and all attached devices to their electrical outlets. 4. Turn on your system.
9 Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Table 1. Self-help resources Self-help resources Resource location Information about Dell products and services https://www.dell.com/ Dell Support Tips Contact Support In Windows search, type Contact Support, and press Enter. Online help for operating system ● Windows: https://www.dell.com/support/windows ● Linux: https://www.dell.
Contacting Dell Dell provides several online and telephone-based support and service options. If you do not have an active Internet connection, you can find contact information about your purchase invoice, packing slip, bill, or Dell product catalog. Availability varies by country/region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to https://www.dell.com/support/. 2.
A Screw size list This section shows the different types of screws used with the Dell Precision 3240 accessories. Table 2.
B Recommended tools This section lists the different tools that may be required to deploy the Dell Precision 3240 Compact system with its supported accessories.
