Owners Manual

6. Install the riser card.
7. Install the memory modules.
8. Install the fan assembly.
9. Install the speaker.
10. Install the WLAN card.
11. Install the hard drive assembly.
12. Install the side cover.
13. Install the SMA antenna.
14. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SMA antenna
3. Remove the side cover.
4. Remove the hard drive assembly.
5. Remove the WLAN card.
6. Remove the speaker.
7. Remove the fan assembly.
8. Remove the memory modules.
9. Remove the riser card.
10. Remove the solid-state drive.
11. Remove the optional I/O card.
12. Remove the heat sink.
13. Remove the interposer module.
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
74
Disassembly and reassembly