Owners Manual

Table Of Contents
Steps
1. Align the riser card and push it down on the PCIe connector of the system board.
2. Tighten the screws (M2x4) that secure the riser card to the system chassis.
Next steps
1. Install the fan assembly.
NOTE: This step is valid for system configuration that is shipped with 80 W CPU.
2. Install the side cover.
3. Follow the procedure in after working inside your computer.
Dell Ultra Speed Drive
Removing the Dell Ultra Speed Drive
Prerequisites
1. Follow the procedure in before working inside your computer.
Disassembly and reassembly
45