Users Guide

38 Configuring Secured iSCSI Connections Using CHAP

Target Settings

Configure the Target settings of CHAP as described in "iSCSI Target

Settings" on page 36 and perform the following steps:

In the

<Target Name> Properties

window, select the

Authentication

tab.

Select the check box for

Enable reverse CHAP authentication

. In the

User name

field, enter the IQN of the Initiator.

In the

Reverse secret

field enter the

Secret

value that you set in the Initiator.

NOTE: Ensure that the reverse secret is not the same as the CHAP secret.

The reverse secret must contain 12 to 16 characters.

Initiator Settings Continued

Configure the Initiator settings for CHAP as described in "iSCSI Initiator

Settings" on page 37.

In the

Advanced Settings

window

→

select

CHAP logon information

→

enter the

User name

and

Target secret

. Select the check box for

Perform

mutual authentication

and click

OK.

You can log in only if you have credentials that you entered for the Target

and Initiator.