Reference Guide

PowerVault ML6000 SCSI Reference Guide 3
Media Changer Commands and Parameters
The following table lists the commands supported by the Media Changer device.
Table 3 Media Changer Supported Commands
Command Code
INITIALIZE ELEMENT STATUS 07h
INITIALIZE ELEMENT STATUS WITH RANGE E7h
INQUIRY
1
12h
LOG SENSE 4Dh
MODE SELECT (6) 15h
MODE SENSE (6) 1Ah
MOVE MEDIUM A5h
PERSISTENT RESERVE IN
1
5Eh
PERSISTENT RESERVE OUT
1
5Fh
POSITION TO ELEMENT 2Bh
PREVENT ALLOW MEDIUM REMOVAL 1Eh
READ BUFFER
1
3Ch
READ ELEMENT STATUS B8h
RELEASE ELEMENT (6)
1
17h
REPORT LUNS
2
A0h
REQUEST SENSE
1
03h
RESERVE ELEMENT (6)
1
16h
SEND DIAGNOSTIC 1Dh
TEST UNIT READY
1
00h
WRITE BUFFER
1
3Bh
1
For the PowerVault ML6000 without DA blades, this command is processed
by the tape drive on behalf of the media changer.
2
The PowerVault ML6000 media changer does not support this command
unless it contains a Data Appliance (DA) blade