Deployment Guide

28 Cabling Your Cluster Hardware
3 Connect each additional cluster or standalone system to the iSCSI
network, similar to step 2.
Figure 2-6. Network-Attached Redundant Cluster Configuration
NOTE: n=8 for Windows Server 2003 and n=16 for Windows Server 2008
NOTE: The SAS out port provides SAS connection for cabling to MD1000 expansion
enclosure(s).
two to n
cluster nodes
Dell PowerVault MD3000i RAID
enclosure (dual controllers)
SAS out
port (2)
Ethernet
management
port (2)
IP SAN (dual
Gigabit Ethernet
switch)
IP SAN (dual
Gigabit Ethernet
switch)
private network
public network
book.book Page 28 Tuesday, April 15, 2008 12:30 PM