Deployment Guide

24 Cabling Your Cluster Hardware
Figure 2-4. Non-Redundant Cluster Configuration
NOTE: Multipath is required for this configuration.
NOTE: Only PowerVault MD3000i with one controller is supported in this
configuration.
NOTE: The SAS out port provides SAS connection for cabling to MD1000 Expansion
Enclosure.
Dell PowerVault MD3000i RAID
enclosure (single controller)
public network
SAS out port
Ethernet
management
port
cluster node 2cluster node 1
private network
book.book Page 24 Tuesday, April 15, 2008 12:30 PM