Owner's Manual

file:///T|/htdocs/SOFTWARE/smconect/msscom/40MDStorageArraysMP/en/readme/DellMPv40_MDStorageArrayMP_Readme.txt[10/19/2012 12:57:16 PM]

corrective actions suggested in the alert to ensure that the storage arrays

that have disappeared from the console start responding in the subsequent

discovery cycles, and are displayed on the SCOM console.

* Management Pack scripts may generate "Script or Executable failed to

Run" - warning alerts. After you take corrective actions suggested in the

alert knowledge base, you must manually close the alert on the SCOM

console.

* The "dell_MDStorageArray_ip.cfg" file contains sample IP addresses

separated by semi-colons. Before importing the management pack, the

operator needs to replace them with the set of MD IP addresses manually

or use the output file of Dell Discovery Utility.

###########################################################################

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the

written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo and PowerVault are

trademarks of Dell Inc.; Microsoft, Windows Vista, Windows, and

Windows Server are either trademarks or registered trademarks of

Microsoft Corporation in the United States and other countries.

Other trademarks and trade names may be used in this document to refer

to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own. Dell is not responsible for the

availability of external websites or their contents.

January 2010