Users Guide

Table 1-2. SCD, Ready/Activity LED, and Fault LED Descriptions (continued)
Condition of
green
Ready/
Activity LED
Condition
of amber
Fault LED
Condition
of white
encryption
LED
Condition of
the SCD Panel
Condition of
the SCD Dot
Meaning of LEDs and SCD Panel and
SCD Dot
Off On Solid Off Flashing once
per second
On/Off Executing the selected option while in
maintenance mode.
Off Flashing
once per
second
Off On Solid Off An error occurred and the tape drive
or media may require service or drive
may require cleaning.
Note the code on the single character
display, and then go to the error code
table in the troubleshooting section to
determine the meaning of the error
codes.
If a
C
appears on the SCD, a
cleaning cartridge must be loaded.
Off Flashing
twice per
second
Off Off Off The drive is updating firmware.
Off Flashing
once every
2 seconds
Off Off Off The drive detected an error and is
performing a firmware recovery. It will
reset automatically.
Rear Panel
1
2
3
4
a80hh095
Figure 1-5. Rear Panel of Internal SAS Tape Drive
1 SAS connector 3 Library interface
2 Ethernet - not iSCSI - for
transferring firmware
and dumps only
4 LED controls for library drive sled
1-6 Dell PowerVault LTO Tape Drive User's Guide