Users Guide

v Select the Enable NTP Server check box to enable time and date control with a time server on the
network.
– NTP server address - Enter the IP address of the time server. IPv4 and IPv6 addresses are
supported, depending on the TCP/IP settings. Host names can be entered instead of numerical
IP addresses if Use DNS is selected in the Network settings.
– Time zone - Enter the time zone relative to Coordinated Universal Time (UTC).
v If the time server is disabled, enter the local time and date manually.
– Date - Enter the date with the MM/DD/YYYY format.
– Time - Enter the time with the HH:MM:SS format.
v Click Load PC date time to synchronize the library with the clock on your host computer at regular
intervals.
3. Click Submit to update the settings.
Configuring encryption settings
Depending on the product you purchased, encryption is enabled or disabled in the factory. If encryption
is enabled, then the Encryption method menu includes Application Managed and Library Managed
encryption options. Also, an additional box, Feature Activation Key, displays the message, "Encryption
is currently licensed." If encryption is disabled, then the Encryption method menu only allows for
Application Managed as an encryption option.
Before you can use the encryption capability of the tape drive, you must be sure that certain software and
hardware requirements are met.
Figure 35. Encryption settings on a non-encryption-licensed library
38 Dell PowerVault TL1000 Tape Autoloader: User's Guide