Users Guide

7. Install the rail assemblies into the rack (Figure 23 on page 27). Ensure the 3 holes in the front of the
unit align with the 1U space marked on the vertical rails in Step 2. Secure the rails to the rack with 4
flat-head screws ▌9▐ on each side of the rack. Use both of the two screw locations on the rear of the
rack rail (Figure 18 on page 24). Use the top and middle screw locations on the front of the rack rail
(Figure 17 on page 23).
a29z0018
7
Figure 22. Creating the rail assemblies
26 Dell PowerVault TL1000 Tape Autoloader: User's Guide