Users Guide

5. Attach the left ▌1▐ and right ▌2▐ rear brackets to the left ▌5▐ and right ▌6▐ front rails with 2
round-head screws ▌10▐ on each side (Figure 21).
Important: Do NOT tighten these screws completely.
6. Slide in the rear rails ▌7▐ from back to front, to create the rail assemblies. Ensure that the screw holes
face outwards (Figure 22 on page 26).
a29z0185
3
8
4
8
11
Figure 20. Attaching the front brackets to the library chassis
a29z0019
5
6
10
1
2
12
Figure 21. Attaching the rear brackets to the rails
Installation and configuration 25