Users Guide
support.dell.com PowerVault 56F 16-Port Fibre Channel Switch Commands 4-15
d.
MM
are the minutes
e.
yy
is the year
2. Press <Enter> to set the date and time.
NOTE: The date function does not support daylight savings time. The date must be
reset manually when the time changes.
4%
The
diagHelp
command displays the diagnostic help commands available for trouble-
shooting switch problems. These commands should be run only as advised by Dell
technical support. The following example shows the information that appears when
the command is run
e
&%.
The
errDisplayFilter
command allows you to specify the minimum error level to be
reported on the PowerVault 51F switch only. Error level values range from 1 to 5. The
following is example of the
errDisplayFilter
command:
Errors with a level of severity lower than 4 are displayed in the error log.
&%
The
errDump
command prints the contents of the error log with no page breaks.
648D
$#3/04
/$94
4$"44
$"1'4444
$E'?"04
2?$944?4
/44$#/03/444
/44$"43/44
9$"444
4#?"444+
"("4
3939%4#$
(49(49%4#$
*(4446*;1"
'#694664'4
#6944'44
6483)