Specifications

l If the button beneath the Date/Time softkey is pressed, the Date/Time Dialog is displayed.
l If the button beneath the Config softkey is pressed, the Config Dialog is displayed.
l If the button beneath the Secure softkey is pressed, the Secure Dialog is displayed.
l If the button beneath the Back softkey is pressed, the Setup Menu Selection is displayed.
Date/Time Dialog
When Date/Time is selected, the Date/Time Dialog is displayed. See Figure 73. This option sets the library date and time.

Figure 73. Setup > Utils > Date/Time Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the Up softkey is pressed, the value of the current field is increased.
l If the button beneath the Down softkey is pressed, the value of the current field is decreased.
l If the button beneath the Next softkey is pressed, the next field in the list is made the active field. If the next field is the last field, see
Figure 74.
l If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.

Figure 74. Setup > Utils > Date/Time > Sync Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the value of the fields is accepted.
l If the button beneath the Yes/No softkey is pressed, the value of the current field is toggled.
l If the button beneath the Next softkey is pressed, the active field reverts to the first field in the list.
l If the button beneath the Cancel softkey is pressed, the Utils Submenu is displayed.
Field
Value
Description
Year
00 .. 99
The year of the century
Month
1 ..12
The month of the year
Day
1 .. 31
The day of the month
Hour
0 .. 23
The hour of the day
Min
0 .. 59
The minute of the hour
Sec
0 .. 59
The second of the minute
Sync interface
Yes
Enable synchronization
No
Disable synchronization (default setting)
Field
Value
Description
Sync interface
Yes
Enable synchronization
No
Disable synchronization (default setting)