Owner manual

1-2 Information Update
www.dell.com | support.dell.com
i In the Fast!UTIL Options window, select Exit Fast!UTIL, and then press
<Enter>.
j Select Reboot System, and then press <Enter>.
Your system reboots with your updated settings.
2 Connect port A on the PowerVault 136T Fibre Channel module to the Fibre Channel
fabric and disconnect port B.
3 Use the Dell PowerVault 136T Fibre Channel Bridge Manager software to channel
zone all of the tape devices within the fabric to port A in the PowerVault 136T.
Figure 1-1 provides an example of this solution.
Figure 1-1. Connecting the PowerVault 136T to One Fibre Channel
Fabric
NetWare host
NetWare host
PowerVault 136T connected to a
Fibre Channel module
Fibre Channel
fabric
Fibre Channel
module port A
is connected
to the fabric
Fibre Channel module
port B is not connected
to the fabric