Manual

Move media allows you to move a tape cartridge from an existing position to a new position. You also use this function to manually insert a tape into a drive or
remove a tape from a drive.
Path:
Figure 5. Magazine Slot Configuration
Selection
Description/Result
Step 1 From the Command menu, highlight
and press .
Moves media within your library.
Step 2 Press and to select the source
slot.
SRC = Source Slot
TGT = Target Slot

The move media screen (see Figure 5)
provides a visual representation of the
storage slots in your library.
Magazine slots:
l shown on the bottom of the screen
l numbered sequentially from left to
right 01 to 14 for LTO and 01 to 12 for
SDLT-320
Rear slots:
l shown on the top of the screen
l numbered sequentially from left to
right 15 to 23 for LTO and 13 to 20 for
SDLT-320
IE slot:
l shown on the bottom right of the
screen
l arrows indicate configured as IE
slot (represented by IE in SRC/TGT
fields)
l vertical bars indicate configured as
data slot (represented by 00 in
SRC/TGT fields)
Drives:
l shown on top right of the screen
l indicated by D1 or D2 in the SRC/TGT
field
Selection
Description/Result
Step 3 Press to move the cursor to the
target field.

In this example, the cartridge in the source
slot 01 is moved to the target slot IE.