Manual

Export Media
Export allows you to move a data or cleaning tape cartridge from the source slot you choose to the IE slot without opening the front door. If the IE slot is
configured as a storage slot, you will not be able to export data cartridges. For more information on configuring the IE slot, see Configure IE Slot.
You can use the Move Media command to export data cartridges when the IE slot is configured as a data slot. For more information, see Moving Media.
Path:
Export Data Cartridge
Step 6 Press and to select the how
many times the cleaning tape has been
used.
You will need to specify how many times this
cartridge has been used, if any.
Step 7 Press to move to next field.

Step 8 Press and to set the maximum
number of times the cleaning tape can be
used.
l For SDLT-320 media, the maximum
number of uses is 20.
l You can specify a different number, if
you wish to restrict the number of
times this cleaning cartridge will be
used.
Step 9 Press to highlight Run ( ) and
then press .
The cleaning cartridge is imported to the first
available cleaning slot.
Step 10 A confirmation screen displays.
Press to dismiss.

Selection
Description/Result
Step 1 Open the IE door and check the IE
slot to make sure that it is empty. If a tape is
present, remove it.

Step 2 From the Command menu, highlight
the icon with the arrow pointing to the top
right corner and press .
Exports media to IE slot.
Step 3 Highlight the icon with the "D" in the
top left corner and press .
Exports a data cartridge.
Step 4 Press and to select the slot
you would like to export the media from.
SRC = source

In this example, the tape cartridge in slot 01
is to be exported to the IE slot.
Step 5 Press to highlight Run ( ) and
then press .
The specified data cartridge is exported to
the IE slot.
Step 6 A confirmation screen displays. Press
to dismiss.

Step 7 You can continue to export data
