Users Guide

Back to Contents Page
Technical Specifications: Dell(tm) PowerVault(tm) 122T LTO-2 Autoloader User's
Guide
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications

Physical Specifications

Autoloader Specifications

Autoloader Environmental Specifications

Tape Drive Specifications
LTO-2 Drive Specifications
Characteristic
Product Alone
Packaged
Height
8.4 cm (3.34 in)
20.5 cm (8.0 in)
Width
41.9 cm (16.5 in)
60 cm (23.6 in)
Depth
60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader)
74.3 cm (29.2 in)
Weight
10 kg (22 lb)
13 kg (29 lb)
Characteristic
Specification
Maximum storage capacity
Native: 1.6 TB
Compressed: 3.2 TB (assuming 2:1 compression ratio)
Maximum data transfer rate
Native: 35 MB/s
Compressed: 70 MB/s (assuming 2:1 compression ratio)
Drive type
1 IBM LTO Ultrium 2 drive
Number of slots
8
MCBF
250,000 hours
Interface
LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector
Characteristic
Specification
Temperature/humidity
Operating
10°to38°C(Wetbulbtemp,32°Cmax)
Non-operating
-40°to65°C(Wetbulbtemp,40°Cmax)
Recommended operating temperature
20°to30°C(Wetbulbtemp,30°Cmax)
Temperature shock immunity - maximum rate of change
10°Cperhour
Humidity
Operating
20% to 80% RH non-condensing
Non-operating
5% to 95% RH non-condensing
Altitude
Operating
0 to 4000 m
Non-operating
0 to 9144 m
Vibration (5-500 Hz)
Maximum acceleration to operating
0.25g RMS (random)
Frequency range
500 Hz
Description
(LTO-2)
Read/write transfer rate: maximum sustained
Non-compressed mode: 35.0 MB/s
Compressed (2:1 typical): 70.0 MB/s
Burst transfer rate
160 MB/s
Average access time
49 seconds
Loading time to BOT
(for previously written tape)
<15 seconds (average)
Unloading time from BOT
<15 seconds (average)
MTBF
250,000 hours
Interface type
Ultra-160 SCSI LVD