Reference Guide

20 LTO Media Handbook
NOTE: It may take up to 20 minutes for a tape cartridge to fully rewind and eject.
Dell PowerVault
110T LTO3-060
(Tandberg)
1 Press and hold the Eject button for six seconds. The drive enters
service mode and all the LEDs flash slowly.
2 Press Eject twice. The Activity LED flashes fast.
3 Double-click the Eject button.
Dell PowerVault
110T LTO3-080
(IBM)
1 Press and hold the Eject button for more than 10 seconds.
2 Release the Eject button.
3 Press Eject again to eject tape.
Dell PowerVault
110T LTO4-120
1 Press and hold the Eject button for more than 10 seconds.
2 Release the Eject button.
3 Press Eject again to eject tape.
Dell PowerVault
110T LTO4-
120HH
1 Press and hold the Eject button for more than 10 seconds.
2 Release the Eject button.
3 Press Eject again to eject tape.
Dell PowerVault
110T LTO5-140
1 Press and hold the Eject button for more than 10 seconds.
2 Release the Eject button.
3 Press Eject again to eject tape.
Table 10. Resetting Your PowerVault 110T LTO Tape Drive (continued)
Drive Type Device Reset Procedure