Administrator Guide

ManualsBrandsDell ManualsCompellent (SCPowerTools Server Hardware Manager

Parameters

Table 18. Drive information

Parameter Description

-a

Specifies the adapter used for the command. This is either SAS

WWID or AdapterIndex.

-enc

Specifies the enclosure used for the command. This is either WWN

or EnclIndex.

-w

Specifies the drawer index used for the command.

-d

Specifies the hard disk drive used for the command. This can be

any of the following:

• WWN — Can be used anytime.

• Serial Number — Can be used anytime.

• Drive OS path — Can be used anytime.

• Drawer Slot Index (Index of the drive in the specific drawer) —

Use if the 'drawer' argument is used for the command.

• Enclosure Slot Index — Use if drawer argument is not being

used for the command

-outputformat

You can specify the following output formats: XML or JSON.

-h

Provides more information about the command, description, and

usage.

-smart

Display the S.M.A.R.T attribute data for the specific physical drive.

Command examples

• info drive -a = 500abcdefgh12345 -enc = 1 -w = 0 -d = 4

• info drive -a = 1 -enc = 1 -d = //./PHYSICALDRIVE50 -smart -outputformat = xml

• info drive -d = 500a123456789012

Show enclosure information

Description

This command provides detailed information about the specified enclosure.

Command syntax

shmcli (info enclosure | infoenclosure | ie) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN |

EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-

outputformat=<SupportedOutputFormats>] | [-h])