Users Guide

Table 18. Firewall parameters (continued)
Parameter # Parameter data
● 2 = both TCP and UDP
● Data 2:3—port number
● [2:3]—Port number from the ports
blocked or unblocked based on the
state.
● [4:9]—Year
● Date 4:9—Start time
● [4:5]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 6—month
● 7—date
● 8—hour
● 9—minute
● Date 10-15—stop time
● [10:11]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 12—month
● 12—date
● 14—hour
● 15—minute
Remove the IPv6 port range with
timeout rule
28 Data 1—Protocol TCP and UDP
● 0 = TCP
● 1 = UDP
● 2 = both TCP and UDP
● Data 2:5—port number
● [2:3]—Port number from the ports
blocked or unblocked based on the
state.
● [4:5]—Year
● Date 6:11—Start time
●
[6:7]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 8—month
● 9—date
● 10—hour
● 11—minute
● Date 12-17—stop time
● [12:13]—Year
● LS-byte first if little endian system.
Two-byte data required to form year.
● 14—month
● 15—date
● 16—hour
● 17—minute
Add the IPv6 address rule
29 Data 1:16—IPv6 address.
● MS-byte first. This is an IPv6 address
that is blocked or unblocked based
on state.
Add the IPv6 address range rule 30 Data 1:16—IPv6 address range
Configuration methods 57