Users Guide

Table 12. User management configuration settings (continued)
Setting Description
● AMI-Format: The subject of this mail format is Alert from (your
Hostname). The mail content shows sensor information, for example: Sensor
type and Description.
● Fixed Subject-Format: This format displays the message according to user
settings. Set the subject and message for the email alert.
Email ID Enter the email ID for the user. If the user forgets the password, a new password is
mailed to the configured email ID.
NOTE: Configure the SMTP server to send the email. The maximum email ID
size is 64 bytes which includes username and domain name.
Existing SSH Key The uploaded SSH key read-only information displays.
Upload SSH Key Use the Browse button to go to the public SSH key file. The SSH key file is of the
pub type.
Power control
Use the Power control section to power off, power off, power cycle, or hard reset the server.
Table 13. Power control settings
Setting Description
Power off Select this option to immediately power off the server.
Power on Select this option to power on the server.
Power Cycle Select this option to first power off, and then reboot the system; a cold boot.
BMC web user interface 31