Users Guide

Port firewall rules
The port firewall rules settings include the existing port rules settings and an option to add new port rule settings.
Table 11. IP address firewall rule settings
Setting Description
Existing port rule settings Displays a list of the existing port firewall rules.
● Click X to delete an item from the list.
● You must be at least an Operator to view the page. To add or delete a firewall,
user must be an Administrator.
Add port rule settings
● Port Single (or) Range Start—Configure the port address or range of port
addresses. A port address supports IPv4 address format only:
○ IPv4 address is four numbers that are separated by dots, for example,
xxx.xxx.xxx.xxx.
○ The range is from 0-65535.
○ Port 80 is blocked for TCP or UDP protocols.
● Port Range End—Configured the port address or range of port addresses. An IP
address supports IPv4 address format only:
○ IPv4 address is four numbers that are separated by dots, for example,
xxx.xxx.xxx.xxx.
○
The range is from 0-65535.
○ Port 80 is blocked for TCP or UDP protocols.
● Enable Timeout—This option enables or disables firewall rules with timeout.
● Start Date—The respective firewall rule effect start from this date.
● Start Time—The respective firewall rule effect start from this time.
● End Date—The respective firewall rule effect ends at this date.
● End Time—The respective firewall rule effect ends at this time.
28 BMC web user interface