Users Guide

SMTP settings
Use the SMTP settings section to configure the SMTP.
Table 5. SMTP settings
Settings Description
LAN Interface Select the LAN interface to configure.
Sender Email ID Enter the Sender Email ID on the SMTP server. The maximum Email ID is 64 bytes,
which includes the username and domain name.
Primary SMTP Support Check this option to enable SMTP support for the BMC.
Primary Server Name Enter the Machine Name of the SMTP Server. This field is for information purpose
only.
● The machine name is a maximum 25 alpha-numeric characters. Space and
special characters are not allowed.
Primary Server IP Enter the Server Address for the SMTP Server. This field is mandatory.
● The IP Address is four numbers that are separated by dots, for example
xxx.xxx. xxx.xxx.
● Each Number range is from 0-255. First Number must not be 0.
Server address supports IPv4 and IPV6 address format and hostname format.
Primary SMTP port Specify the SMTP port, from 1-65535. This field is mandatory.
● The default port is 25.
Primary Secure SMTP port Specify the SMTP Secure port, from 1-65535.
● The default port is 465.
Primary SMTP Authentication Check Enable to enable SMTP Authentication. SMTP Server Authentication
supported types are:
● CRAM-MD5
● LOGIN
● PLAIN
Primary Username Enter the username to access SMTP Accounts.
● The User Name is 4-64 alpha-numeric characters, dot(.), hyphen(-), and
underscore(_). Other special characters are not allowed.
● The User Name must start with an alphabet.
Primary password Enter the password for the SMTP User Account.
● Password must have a minimum of four characters.
● The password maximum is 64 characters.
● White space is not allowed.
Primary SMTP SSLTLS Enable Check Enable to enable the SMTP SSLTLS protocol.
Primary SMTP STARTTLS Enable Check Enable to enable the SMTP STARTTLS protocol.
Secondary SMTP Support Check this option to enable Secondary SMTP support for the BMC.
BMC web user interface 19