Users Guide

Network settings
Use the Network settings section to configure the network IP address, link configuration, and DNS.
Network IP settings
The Network IP settings sections allow you to view and set the following:
Table 2. Network IP settings
Setting Description
Enable LAN Check this option to enable LAN support for the selected interface.
LAN interface Select the LAN interface to configure.
MAC address This read-only field displays the MAC address of the selected interface.
Enable IPV4 Check this option to enable IPv4 support for the selected interface.
Enable IPv4 DHCP Check this option to enable IPv4 DHCP support to dynamically configure IPv4
address using DHCP.
Ipv4 Address If you disable DHCP, specify a static subnet mask to configure for the selected
interface.
● IP address—consists of four sets of numbers that are separated by dots, for
example, xxx.xxx.xxx.xxx.
● Each set range is 0-255.
● First number must not be 0.
IPv4 Subnet If you disable DHCP, specify a static default gateway to configure for the selected
interface.
● IP address—consists of four sets of numbers that are separated by dots, for
example, xxx.xxx.xxx.xxx.
● Each set range is 0-255.
● First number must not be 0.
Enable IPv6 Check this option to enable IPv6 support for the selected interface.
Enable IPv6 DHCP Check this option to enable IPv6 DHCP to dynamically configure IPv6 address using
DHCPv6.
IPv6 Index Choose the Ipv6 index.
Ipv6 Address Specify a static IPv6 address to configure for the selected interface.
Subnet Prefix Length Specify a static IPv6 address to configure for the selected interface. The range is
0-128.
Enable VLAN Check this option to enable VLAN support for the selected interface.
VLAN ID Specify the Identification for VLAN configuration. The range is 1-4094.
NOTE: You cannot change the VLAN ID without resetting the VLAN
configuration. VLAN IDs 0 and 4095 are reserved VLAN IDs.
VLAN Priority Specify the priority for the VLAN configuration. The range is 0-7.
BMC web user interface 13