Setup Guide

Specifications
This section lists the Z9432F-ON switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).
NOTE: For RoHS information, see Restricted Material Compliance.
Topics:
• Chassis physical design
Chassis physical design
Table 1. Chassis physical design
Parameter Specifications
Height 43 mm (1.693 inches)
Width 438.5 mm (17.26 inches)
Depth 550 mm (21.65 inches)
● PSU handle 29.3 mm (1.15 in)
● PSU latch 34.6 mm (1.37 in)
● Fan tray handle 25 mm (0.99 in)
Chassis weight with factory-installed components
● 11.78 kg (2 PSUs and 7 fans)
● 25.97 lbs (2 PSUs and 7 fans)
Rack clearance required
● Front: 12.7 cm (5 inches)
● Back: 12.7 cm (5 inches)
Table 2. Environmental parameters
Parameter Specifications
Operating temperature 0°C–45°C (32°F–113°F) continuously
NOTE: Reduce maximum temperature by 1°C/125 meters
(1°F/228 ft) above 950 meters (3,117 ft).
Operating humidity 5% – 90% (RH), noncondensing
Storage temperature -40°C–70°C (-40°F – 158°F)
Storage humidity 5% to 90%, noncondensing
Maximum thermal output 1362 W = 4647.3 BTU/Hr
Maximum operational altitude 3,048 meters (10,000 ft)
Maximum nonoperational altitude 10,668 meters (35,000 ft)
Shock Dell EMC Spec SV0115 (108000336_REV_25)
Acoustics Front-to-back fan direction:
● 25C idle @ 30% duty cycle, 7.1 bels
4
Specifications 25