Setup Guide

Specifications

This section lists the Z9332F-ON switch specifications.

CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).

NOTE: For RoHS information, see Restricted Material Compliance.

Topics:

• Chassis physical design

Chassis physical design

Table 1. Chassis physical design

Parameter Specifications

Height

1.70 inches (43.1 mm)

Width

17.26 inches (438.5 mm)

Depth

25.88 inches (657.5 mm)

Chassis weight with factory-installed components 31 lbs (14.1 kg)—PSUs and fans

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 2. Environmental parameters

Parameter Specifications

Operating temperature 0° to 45°C (32°F to 113°F) continuously

NOTE: Reduce maximum temperature by 1°C/125

meters (1°F/228 feet) above 950 meters (3,117 feet).

Operating humidity 5% to 85% (RH), non-condensing

Storage temperature –40° to 70°C (–40° to 158°F )

Storage humidity 5% to 90%, non-condensing

Maximum thermal output 635W = 2167 BTU/Hr

Maximum operational altitude 10,000 feet (3,048 meters)

Maximum non-operational altitude 39,370 feet (12,000 meters)

Shock Dell EMC Spec SV0115

NOTE: AC power requires HighLine 200 VAC to 240 VAC support. You cannot use 120 VAC.

Table 3. AC power requirements

Parameter Specifications

Power supply

200–240 VAC 50/60 Hz

Maximum current draw per system

8.5A@200VAC

14 Specifications