Setup Guide

Slide the rail back until it locks into place.

6. Repeat with the second rail.

7. Align the two outer-rail rear tabs with two rear rackmount slots.

8. Pull the outer rail forward until the rear tabs snap into the rack.

9. Align the two outer-rail front tabs with two front rackmount slots and snap the outer rail into the rack.

10. Slide the switch inner rails into the rack outer rails.

11. Slide the blue-plastic lever towards the rear of the rack to fully insert the switch in the rack.

You can pull or push the blue-plastic lever as it is bi-directional.

Z9332F-ON Installation