Setup Guide

Technical Specifications

This chapter lists the Z9100–ON specifications.

NOTE: Operate the system at an ambient temperature not higher than 113°F (45°C).

CAUTION: Lithium Battery Caution: To avoid the possibility of an explosion, always replace the

battery correctly.

NOTE: Replace the battery only with the same or an equivalent type. Dispose of the batteries

according to the manufacturer's instructions.

Table 3. Z9100–ON Chassis Physical Design

Parameter Specifications

Height 1.72 inches (44 mm)

Width 17.1 inches (434 mm)

Depth

Chassis: 18.2 inches (462 mm)

Handle: 1.57 inches (40 mm)

Chassis weight with factory-installed components 19 lbs (8.62 kg) (2*PSUs)

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 4. Environmental Parameters

Parameter Specifications

Operating temperature 32° to 113°F (0° to 45°C)

NOTE: Reduce maximum temperature by

1°C/300 meters (1°F/547 feet) above 950

meters (3,117 feet).

Operating humidity 5 to 90 percent (RH), noncondensing

Storage temperature –40° to 158°F (–40° to 70°C)

Storage and non-operating humidity 5 to 95 percent (RH), noncondensing

Maximum thermal output 1153.265 BTH/hr

Maximum operational altitude 10,000 feet (3,048 meters)

Maximum non-operational altitude 39,370 feet (12,000 meters)

Shock Meets Bellcore Zone 4 earthquake requirements

(MIL-STD-810)

Technical Specifications