Install Guide

Figure 3. Z9100–ON PSU-side view
1 Fan modules 2 Power supply units
Features
The Z9100–ON oers the following features.
• QSFP ports support 10/25/40/50/100 GbE
• Two 1000M/10G SFP+ ports
• One micro universal serial bus (MicroUSB-B) console port
• One 2.0 USB Type-A port for additional le storage
• One 10/100/1000BaseT Ethernet management port
• Rangeley central processing unit (CPU) system with 8GB DDR III RAM.
• Temperature monitoring
• Software-readable thermal monitor
• Real time clock (RTC) support
• Two hot-pluggable redundant power supplies
• Power management monitoring
• Five removable fans
• Standard 1U chassis
Physical dimensions
The Z9100-ON has the following physical dimensions:
• 434 x 462 x 44 mm (W x D x H)
• 17.1 x 18.2 x 1.72 inches (W x D x H)
• Handle: 40 mm (1.57 inches)
LED display
The Z9100–ON includes LED displays on the I/O side of the switch. This section describes open networking installation environment
(ONIE) LED behaviors. Some LED behaviors may change after you install your software.
NOTE
: If you are installing third-party software, for LED information, see your third-party operating software documentation.
The Z9100–ON switch 7