CLI Guide

Version Description
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
Usage Information The administrative distance indicates the trust value of incoming packets. A low
administrative distance indicates a high trust rate. A high value indicates a lower
trust rate. For example, a weight of 255 is interpreted that the routing information
source is not trustworthy and should be ignored.
distribute-list in
Filter network prefixes received in updates.
Syntax
distribute-list prefix-list-name in [interface]
To return to the default values, use the no distribute-list prefix-list-
name in [interface] command.
Parameters
prefix-list-name Specify the prefix list to filter prefixes in routing updates.
interface (OPTIONAL) Identifies the interface type and the interface
following:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword
twentyFiveGigE then the slot/port/subport
information.
• For a 50-Gigabit Ethernet interface, enter the keyword
fiftyGigE then the slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword
hundredGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults Not configured.
Command Modes
• ROUTER ISIS (for IPv4)
874
Intermediate System to Intermediate System (IS-IS)