CLI Guide

Version Description

7.6.1.0 Introduced on the S-Series.

Usage Information

You must reload Dell Networking OS after executing this command.

Example

Dell#upgrade boot ?

all Upgrade both boot flash image and selector

image

bootflash-image Upgrade boot flash image

bootselector-image Upgrade boot selector image

Dell#

verify

Validate the software image on the flash drive after the image has been transferred to the system, but

before the image has been installed.

Syntax verify { md5 | sha256 }[ flash:// ] img-file [hash-value]

Parameters

md5 Enter the md5 keyword to use the MD5 message-digest

algorithm.

sha256

Enter the sha256 keyword to use the SHA256 Secure Hash

Algorithm

flash:// (Optional). Enter the flash:// keyword. The default is to

use the flash drive. You can just enter the image file name.

img-file Enter the name the Dell Networking software image file to

validate.

hash-value (Optional). Enter the relevant hash published on i-Support.

Defaults flash drive

Command Modes EXEC mode

Command History Version 9.5.(0.0)

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.

Usage Information

You can enter this command in the following ways:

• verify md5 flash://img-file

• verify md5 flash://img-file <hash-value>

File Management