CLI Guide

Version Description
8.4.2.1 Introduced on the S-Series.
8.4.2.0 Introduced on the E-Series.
7.8.1.0 Introduced on the C-Series.
Example
Example (Manual
Profiles)
Dell# show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
Dell#
Related
Commands
• cam-acl — configure CAM profiles to support IPv6 ACLs.
show ipv6 accounting access-list
View the IPv6 access-lists created on the E-Series and the sequence of filters.
Syntax
show ipv6 accounting access-list [access-list-name [cam_count |
interface interface {in | out}]
Parameters
access-list-name Enter the name of the ACL to be displayed, up to 140
characters.
cam_count List the count of the CAM rules for this ACL.
interface interface Enter the keyword interface followed by the interface
type and slot/port or number information:
• For a Port Channel interface, enter the keywords port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is
1 to 255 for TeraScale and 1 to 512 for ExaScale.
IPv6 Access Control Lists (IPv6 ACLs)
849