CLI Guide

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.0.2.0 Introduced on the S6000.

9.0(0.0) Added support for IPv6 for the file-url parameter.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000. Added support for the SSD on the

Z9000 only.

8.3.7.0 Introduced on the S4810.

Usage Information

You must reload FTOS after executing this command.

Example

Dell#upgrade system ?

flash: Copy from flash file system (flash://filepath)

ftp: Copy from remote file system, IPv4 or IPv6, (ftp://

userid:password@hostip/filepath)

scp: Copy from remote file system, IPv4 or IPv6, (scp://

userid:password@hostip/filepath)

stack-unit Sync image to the stack-unit

tftp: Copy from remote file system, IPv4 or IPv6, (tftp://

hostip/filepath)

usbflash: Copy from usbflash file system (usbflash://filepath)

Dell#

upgrade boot

Upgrade the bootflash image or bootselector image.

Syntax

upgrade boot {all | bootflash—image | bootselector-image}stack-

unit {stack—unit—id | all}{booted | flash: | ftp: | scp: |

tftp: | usbflash:} {A: |B:}

Parameters

all Enter the keyword all to change both the bootflash and

bootselector images.

bootflash-image Enter the keyword bootflash-image to change the

bootflash image..

File Management