CLI Guide

1000
Dell#
show ip fib stack-unit
View all Forwarding Information Base (FIB) entries of a specific stack-unit.
Syntax
show ip fib stack-unit stack-unit-number vrf vrf-name [ip-
address [mask] [longer-prefixes] | summary]
Parameters
stack-unit-
number
Enter the stack unit ID.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
view FIB entries corresponding to that VRF.
ip-address mask (OPTIONAL) Enter the IP address of the network destination
to view only information on that destination. Enter the IP
address in dotted decimal format (A.B.C.D). Enter the mask
in slash prefix format (/X).
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
summary (OPTIONAL) Enter the keyword summary to view the total
number of prefixes in the FIB.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
IPv4 Routing
811