CLI Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.2.1.0 Added support for 4093 VLANs on E-Series. Prior releases
supported 2094.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example (Single
Range)
This example shows how to define an interface range macro named test. Execute
the show running-config command to display the macro definition.
Dell(config)# define interface-range test tengigabitethernet
1/1/1 - 1/3/1,
tengigabitethernet 1/5/1 - 1/7/4, tengigabitethernet 1/11/1 -
1/18/3
Dell# show running-config | grep define
define interface-range test tengigabitethernet 1/1/1 - 1/3/1,
tengigabitethernet 1/5/1 - 1/7/4,
tengigabitethernet 1/11/1 - 1/18/3
Dell(config)# interface range macro test
Dell(config-if-range-
te-1/1/1-1/3/1,te-1/5/1-1/7/4,te-1/11/1-1/18/3)#
Dell(config)# define interface-range test HundredGigE 1/1 -
1/3,
HundredGigE 1/7 - 1/17, HundredGigE 1/19 - 1/22
Dell# show running-config | grep define
define interface-range test HundredGigE 1/1 - 1/3, HundredGigE
1/7 - 1/17, HundredGigE 1/19 - 1/22
Dell(config)# interface range macro test
Dell(config-if-range-hu-1/1-1/3,hu-1/7-1/17,hu-1/19-1/22)#
Related
Commands
• interface range – configure a range of command (bulk configuration).
• interface range macro name – run an interface range macro.
interface range macro name
Run the interface-range macro to automatically configure the pre-defined range of interfaces.
Syntax
interface range macro name
696
Interfaces