CLI Guide

54:7f:ee:37:34:40 Po 22 100 0e:fc:00 4000
2
show fip-snooping statistics
Display statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port
channels.
Syntax
show fip-snooping statistics [interface vlan vlan-id |
interface port-type port/slot | interface port-channel port-
channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics displays.
port-type port/
slot [/subport]
Enter the port-type and slot number of the FIP packet
statistics displays. Enter the subport number if a 40G port is
fanned-out into 10G ports.
port-channel-
number
Enter the port channel number of the FIP packet statistics
displays.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage Information The following describes the show fip-snooping statistics command shown
in the following example.
Field Description
Number of VLAN
Requests
Number of FIP-snoop VLAN request frames received on the
interface.
FIP Snooping
613