CLI Guide

Version Description

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the Z9500 and S6000-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is 12.

The default number of FIP snooping sessions supported per ENode server is 32.

The maximum number of FIP snooping sessions supported per ENode server is 64.

fip-snooping fc-map

Configure the FC-MAP value FIP snooping uses on all VLANs.

Syntax

fip-snooping fc-map fc-map-value

To return the configured FM-MAP value to the default value, use the no fip-

snooping fc-map command.

Parameters

fc-map-value Enter the FC-MAP value FIP snooping uses. The range is

from 0EFC00 to 0EFCFF.

Defaults 0x0EFC00

Command Modes

• CONFIGURATION

• VLAN INTERFACE

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.