CLI Guide

ifm Enter the keyword ifm for IFM-specific debugging.
info Enter the keyword info for information-specific debugging.
ipc Enter the keyword ipc for IPC-specific debugging.
ns Enter the keyword ns for name-server-specific debugging.
rscn Enter the keyword rscn for RSCN-specific debugging.
rx Enter the keyword rx for packet receive-specific
debugging.
tx Enter the keyword tx for packet transmit-specific
debugging.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug fip snooping rx
Enable debugging for FIP snooping receive-specific packets.
Syntax
debug fip-snooping rx packet-type [all | discovery | ns |
virtual-link-instantiation | virtual-link-maintenance| vlan-
discovery] [interface]
Parameters
packet-type Enter the keyword packet-type and then the option type
on which to enable debugging. The options are:
• all — Enter the keyword all to enable debugging on
all the options.
• discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode
solicitation.
FIP Snooping
605